Showing posts with label P-7-C. Show all posts
Showing posts with label P-7-C. Show all posts

Saturday, August 9, 2014

A Renaissance in Cookware - Corning Ware Renaissance Limited Edition Gift Line

Over the last year, I have written up many posts on Corning Ware patterns in order to provide some semblance of a record for the online community.  The whole idea stemmed from the myriad patterns I kept  running into during my quest for my own favorite pattern, being "Wheat".  There has been one pattern, however, that has eluded me over the last year... Actually, it has been eluding me since 2007 when I first found out about it.

Renaissance.   The limited edition Gift Line pattern from 1970.  The pattern is a copy of an old etching of Stockholm's seaport with victory arch in the book Suecia Antiqua et Hodierna written by Erik Dahlbergh around the middle of the 17th century.

The enamel color chosen by Corning to replicate the etching is referred to as Miniver Grey.

(I attempted to re-stage the original ad, alas I am missing the casserole that was in the 2 1/2 quart along with the purple napkin and 4 forks)

This is the complete set (as far as I know right now --  a new piece of Platinum Filigree just surfaced, so who knows)

The P-84-B (4 quart Sauce Pot)

the P-2 1/2-B Sauce Pan (2 1/2 quart Saucepan)

and the P-1 3/4-B quart Sauce Pan (1 3/4 quart Saucepan)

All three of these pieces show only part of the entire scene.   For a more "panoramic view", one must look to the P-35 Broil and Bake tray, however even this is not the entire scene.....

The last piece in the collection is the 9 cup stove top percolator (P-149) which features the Cathedral located on the left side of the tray.

and then continues the etching all the way around the back side.... Giving you the complete picture.




I did get the wood handled cradle with the P-84-B, which is how it originally came.   The smaller saucepans were paired with the chrome "Royal Buffet" candle warming cradles.  I don't particularly care for the wood handled cradle with this pattern, as it covers up too much of the design.  I will probably opt for the Platinum Cradles when I use my Renaissance pieces. Which will only be for "uber" special occasions.

One thing of note, is the special lids that came with the Renaissance pieces (and "Nature's Bounty" in 1971). All 3 of the lids (P-7-C, P-9-C, and P-12-C) have a pebble texture on their underside.....

as opposed the the non-pebbled standard lids (left)




Where is your Corning Ware??
~~

Thursday, April 24, 2014

I Got Some Mad Skill...ets - My P-Series Cornflower Collection (Part 2)

Well, last night's dinner was responsible for this collection post.  It was a tour de force in skillet usage. Thus, I decided since I had half of my skillets out on the stove or in the oven already, it would be fitting to make "Skillets" Part 2 of my P-series Cornflower Collection.  And quite the Skillet Stockpile it is...  

Top - P-7-B with P-7-C lid (7 inch) sitting in a P-9-B with P-9-C lid (9 inch) sitting on the P-10-B with P-10-C lid (10 inch) sitting on the P-16-B with P-12-C lid (11 inch). 

I do have 5 other skillets in Cornflower, but they are technically not part of the P-Series.  One is an A-series Electromatic Skillet pan (A-22) so I will save that one when I cover the Electromatic Skillets;  2 are Rangetoppers which are N-Series so those will have to wait.  The other two, however, I will go ahead add.... because there really don't have any place else to be.

My 1st and 2nd Generation 10 inch skillets with the Pyroceram lids. (they are really 9 7/8 inches, so the P-10-C lids will not fit them, conversely their Pyroceram lids don't fit on the P-10-B either)

The top one is the 1st Generation (1958/59) with the embossed information on the bottom in the center stating "Corning Pyroceram  Made in the U.S.A". 

The one on the bottom is the 2nd Generation (1959/60) with the fuzzy blue print on the bottom stating '10 IN" Corning Ware Pyroceram Made in the U.S.A'.

Neither of these pieces have model numbers, since model numbers didn't exist yet, (the B-38 on the 1st Gen piece is a mold number, not a model number).  Even though these pieces are model number-less, the P-series detachable handles fit on their lugs, so for all intensive purposes, these are P-series as well.

Where is your Corning Ware??
~~